Your Wireless Connection for Speed!





700-2700MHz WiFi – Cellular 7dBi Directional MIMO Antenna (± 45°) RJ45 Connector

4.80 out of 5 based on 5 customer ratings
(5 customer reviews)


Designed to accommodate internal installation of LTE router or PCB

Only 10 left in stock

Warranty: 30 Days


WiFiX ADM 1DP727X7 is a Cellular MIMO 2×2 X-Polarity 7dBi directional panel antenna with RJ45 cable connector glands

The ADM 1DP727X7 Cellular 8dBi MIMO antenna is a wide band directional panel antenna engineered to improve signal strength and reception over a wide range of frequencies and applications.  It is ideal for rural, suburban and other locations where the mobile signal is poor or less than desirable, or where a better signal is required to take advantage of carrier aggregation.

Its wide range design allows the antenna to be carrier neutral, covering the 700/800/850/1700/1800/1900/2100/2300/2500/2600/2700 frequencies.  Its aesthetic appearance accommodate installations at most any location, even for high demanding applications and customers.

This antenna includes the frequency range for 2.4Ghz WiFi. It can be used for WiFi transmission and reception of WiFi or Cellular signals, but it cannot be used for both at the same time.

The antenna component and circuitry are integrated within our top quality WiFiX Extra Large (11.5 in x 19.13 in x 4.17 in) enclosure system.  




The ADM 1DP727X7 RJ provides a rather spacious internal enclosure for installing most any size of router, hotspot and/or PCB.  It is especially suited for PoE applications (such as our WG3526-P or Cradlepoint CBA850) by installing its RJ45 waterproof IP67 cable gland/jack (included) in the single cutout hole.  3M adhesive standoff mounts (boss/stands) are included to secure an internal router or PCB in place.



The enclosure is equipped with locations where additional holes may be drilled to install SMA, RP-SMA, Type N, or another other bulkhead connectors. 



The system includes 2 x U.FL pigtails mounted directly to the antenna’s backing plate.  This allows a Mini PCI-E modem (i.e., Quectel EP06-A) to connect directly to the antenna components.


The U.FL Male connectors can be coupled to a wide range of devices buy using one of our TS-9, SMA Male Right Angle (or Straight) as well as MHF4 connectors for M.2 modems (i.e., EM7565, EM7455….).





Proper assembly for the RJ45 Bulkhead Seal:

RJ45 Bulkhead Cable Passthrough Assembly Steps

RJ45 Bulkhead Cable Passthrough Assembly Steps


The WiFix ADM 1DP727X7 RJ is suitable for indoor and outdoor (IP67) installations, both wall and pole mask mounting. 



Wall and Pole Mask Installations

WiFiX systems are engineered of UV resistant ABS plastic material that is resistant to extreme weather conditions like rain, snow and humidity. They can safely operate in temperatures ranging from -40°C up to 80°C.  WiFix designed sealing systems guarantees a waterproofed level of IP67. 


WiFix Systems are IP67 Waterproof


The WiSecure mounting system is engineered to couple stability and attractiveness in one product. Its design is made of a special fiberglass reinforced polyamide plastic, which is super rigid–even in extreme weather conditions.  Its innovative design and composite makeup, compared to metal brackets, offers better performance and a rust free life-time. WiSecure further enables the antenna position and aligning in two separate polarization settings.



WiSecure Antenna Mounting System

WiSecure Antenna Mounting Detail

WiSecure Antenna Mounting Detail




NOTICE: This antenna listing comes with ONE WiSecure Antenna Mount included with your purchase of the antenna. You do not need to purchase a separate mounting system.



Additional information

Weight 130 oz
Dimensions 20.25 × 16.5 × 4.75 in
Antenna Type


, , , , , , , , , , , ,

Antenna Connector


LTEFIX-Datasheet-ADM 1DP727X7 RJ-v1.0

Carriers | Bands

Carriers | Bands

The ADM 1DP727X8 RJ is a wide band|frequency antenna–meaning it is compatible with the vast majority of carriers.

  • LTE band – 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 17, 18, 19, 20, 23, 25, 26, 27, 28, 33, 34, 35, 36, 37, 38, 39, 40, 41, 44, 66, 71
  • WiMAX – 2.3 GHz, 2.5 GHz, 700 MHz
  • 3G – 2100 MHz, 850 MHz, 900 MHz
  • GSM – 1800 MHz, 1900 MHz, 850 MHz
  • RFiD – 2400 – 2483 MHz, 865 – 868 MHz, 902 – 928 MHz
  • ISM – 2400-2483 MHz, 868-870 MHz
  • WLAN – 2.4 GHz
  • Bluetooth – 2400-2483 MHz

5 reviews for 700-2700MHz WiFi – Cellular 7dBi Directional MIMO Antenna (± 45°) RJ45 Connector

  1. 5 out of 5


    This is a huge antenna with lots and lots of room inside. Bought it to use with my Netgear Nighthawk with the TS9 adapter kit which worked okay. Took someone’s suggestion on the ltehacks facebook group and purchased a cradlepoint CBA850 to take the place of the nighthawk. Great move. Pulling strong signals from a cell tower 8 miles away with consistent 65 DL and 35 UL speeds using AT&T plan. Since this is a directional antenna, it helps to research and know what direction the tower is from your location which will save time on the installation.

  2. 5 out of 5


    Very good quality antenna. As stated before, It has plenty of room for mounting a router and modem.
    The only thing it needs is to include 1 Stainless Steel washer to place over the ground wire ring terminal. The washer would protect the ring terminal from damage while tightening the U bolt nut.

  3. 5 out of 5


    Great antenna! Plenty of room to install my Nighthawk. Totally increased my speeds and made them more consistent.

  4. 5 out of 5


    I was initially skeptical despite the positive reviews. Now I’m nothing less than impressed. I reside in a heavy wooded rural area where cell phones seldom work. I installed my Cradlepoint CBA850 in this antenna and mounted it off the roof, connected to my router and instantly had internet, all before actually aiming or zeroing it in the antenna. I went from no service to 30MB down on AT&T LTE service. While this is may not be considered as blazingly fast, it’s very usable for Netflix and other video streaming. Giving credit where credit is due…Lte Fix…great antenna and very helpful instructional material on your forum.

  5. 4 out of 5


    Very high quality enclosure. Plenty of room for mounting router/modem and poe splitter. Antenna gain is a little less than I hoped for on this unit. Overall very satisfied

Add a review

Product Enquiry

Frequently purchased with this product