WiFiX AD4M 1DP738X8 RJ is a cellular 4 x 4 MIMO X-Polarity 8dBi directional panel antenna with IP67 rated RJ45 bulkhead connector
The AD4M 1DP738X8 RJ 8dBi MIMO antenna is a wide band directional panel antenna engineered to improve signal strength and reception over a wide range of 4G/LTE/5G frequencies and applications. It is ideal for rural, suburban and other locations where the mobile signal is poor or less than desirable, or where a better signal is required to take advantage of carrier aggregation.
Note: We customized the AD4M 1DP738X8 RJ further to allow installing your modem and router, as well as anything else you can, inside the enclosure with the antenna. Just like our popular WiFix 700-2700MHz WiFi 4G LTE 8dBi Directional MIMO Antenna (± 45°) RJ45 Connector antenna.
Like the popular WiFiX exclusive antenna AD4M 1DP738X8 NF we have customized this antenna with a new frequency range. This new frequency range is now 700Mhz-3800Mhz to include the upcoming 5G Sub 6Ghz mid-band cellular frequency bands. This antenna has also been tested to pickup up Band 71.
Its wide range design allows the antenna to be carrier neutral, covering the 700/800/850/1700/1800/1900/2100/2300/2500/2600/2700/3800 frequencies. Its aesthetic appearance accommodate installations at most any location, even for high demanding applications and customers.
This antenna includes the frequency range for 2.4Ghz WiFi. It can be used for WiFi transmission and reception of WiFi or Cellular signals, but it cannot be used for both at the same time.
The antenna component and circuitry are integrated within our top quality WiFiX Extra Large (15.43 in x 15.59 in x 3.80 in) enclosure system.
Outside profiles of the AD4M 1DP738X8 RJ
The AD4M 1DP738X8 NF is equipped with IP67 rated RJ45 Bulkhead Connector
Inner Dimensions of the AD4M 1DP738X8 RJ
The internal “Free Space” underneath the antenna back plane is roughly 13.75″ x 13.75″ x 1″
Installing a router and other equipment inside will require short pc board standoffs. You can modify our Adhesive Router PC Board Mounting Pads by cutting them down. Make sure the overall height of the router is under 1″. We also sell a Low Profile Adhesive Router PCB Mounting Pads kit.
Note: It is the customers responsibility to ensure their equipment will fit inside the enclosure, we cannot accept returns for items that don’t meet the customers needs because they did not do their research first. We cannot claim responsibility for customer damaged items due to lack of experience or negligence in installation or handling methods.
Example of internal installations:
WiFix WG1608D-M, and a 5G Modem, inside the AD4M 1DP738X8 RJ with a 12V POE Splitter
Needed modifications to fit equipment inside:
The AD4M 1DP738X8 RJ antenna has four U.fl connectors inside on RG178 cabling coming from each of the four antenna elements. To use this with an M.2 style modem, that has MHF4 connectors, you must adapt these connectors. We carry them for your convenience: MHF4 to U.FL Pigtail Adapter for M.2 Modem Connectors. You will need four of them.
Example U.fl to MHF4 pigtail Adapter installation:
UFL to MHF4 Pigtail Adapter on 4×4 MIMO RJ Panel Antenna
Proper assembly for the RJ45 Bulkhead Seal:
The WiFiX AD4M 1DP738X8 RJ is suitable for indoor and outdoor (IP67) installations, both wall and pole mask mounting.
WiFix systems are engineered of UV resistant ABS plastic material that is resistant to extreme weather conditions like rain, snow and humidity. They can safely operate in temperatures ranging from -40°C up to 80°C. WiFix designed sealing systems guarantees a waterproofed level of IP67.
The WiSecure mounting system is engineered to couple stability and attractiveness in one product. Its design is made of a special fiberglass reinforced polyamide plastic, which is super rigid–even in extreme weather conditions. Its innovative design and composite makeup, compared to metal brackets, offers better performance and a rust free life-time. WiSecure further enables the antenna position and aligning in two separate polarization settings.